Pool system
 		  
  1. Join the curved elements to each others with bolts and nuts like shown in picture 1.

2. Fix  pieces 1and 2 like shown in pictures 1 and 2, use 5x35 screws and angle brackets.

  
   
     
  3. Fix pieces 3,4 and 5 like in the picture 2. Join two beams on the lower board of the curved element, beams are to support benches on the pool.

4. Rise the fibre-glass pool inside elements. Fix the heater with  5x70 screws.

5. Fix stair-step-element with 5x35 screws and fastening plates.

6. Prepare the pool by joining fences between the heater and the pool room with 5x35 and 5x70 screws.